Hi, what are you looking for?

According to our latest study on “Europe Dental CAD/CAM Market” is projected to reach US$ 808.06 million by 2028 from US$ 432.58 million in 2021; it is expected to grow at a CAGR of 9.3% from 2021 to 2028. The report highlights trends prevailing in the market, and the drivers and restraints pertaining to the market growth. The growth of this market is estimated to grow owing to key driving factors such as the increasing oral diseases and geriatric population and rising adoption of chair-side CAD/CAM systems. However, high cost of CAD/CAM system and lack of reimbursements hamper the market growth.

Technology plays an essential role in the improvement of working conditions in dental offices and dental laboratories. Developments in digital dentistry have resulted in a better patient experience; these developments also help enhance the productivity and profitability of dental practices, and create a brief understanding of the use of CAD/CAM technology in dentistry. This refers to digitally designing dental appliances, crowns, CAD, and manufacturing those products with CAM. Over the past few decades, digital dentistry technologies have enabled physicians to improve patient care by significantly reducing the time required for the restorative phase of treatment. Advancements in intraoral scanning, and computer-aided design and manufacturing (CAD/CAM), coupled with the introduction of new CAD/CAM dental ceramic materials, have simplified patient care and brought same-day dentistry into reality. The accuracy and reliability of modern manufacturing processes and 3D scanning have empowered the manufacturing of dental objects. It can be used to design and construct veneers, implant abutments, crowns, and inlays, on lays, fixed partial dentures, and full mouth reconstructions.

Sample PDF showcases the content structure and the nature of the information included in the report which presents a qualitative and quantitative analysis – https://www.businessmarketinsights.com/sample/BMIRE00025175

Major key players covered in this report:

The economy of this region is expected to witness a boom in the dental CAD/CAM industry in the coming years. Intraoral scanners are widely used for capturing direct optical impressions in dentistry. Most dentists use state-of-the-art intraoral scanners to take high-speed impressions of teeth. Many dental CAD/CAM systems manufacturers are moving to an open architecture as the software can exhibit compatibility with any milling unit. Technological advancements in intraoral scanners and CAD ensure safety, along with improving patient outcomes. In February 2018, Nobel Biocare launched its newly expanded CAD/CAM product range, in partnership with KaVo. The newly launched KaVo LS 3 desktop scanner is designed to improve flexibility and connectivity among dental technicians and patients. Therefore, increasing dental problems and technological advancements are bolstering the growth of the Europe dental CAD/CAM market.

Based on product type, the dental CAD/CAM market is segmented into segmented into dental CAD/CAM materials and dental CAD/CAM systems. In 2020, the dental CAD/CAM materials segment is likely to account for the highest share of the market. CAD/CAM systems were created for dental applications other than the fabrication of restorations. The use of high-strength construction materials such as alumina- and zirconia-based ceramics for restoration cores and frameworks, which can only be shaped with CAD/CAM systems, has increased the lifespan of expanded the demand for CAD/CAM-produced restorations. In addition, CAD/CAM systems have been developed to produce surgical templates to guide the placement of dental implants and working models that allow restorations to be placed immediately after implant placement. The dental CAD/CAM materials segment is also expected grow at a highest CAGR of 9.5% in Europe dental CAD/CAM market in the anticipated years.

Immediate delivery of our off-the-shelf reports and prebooking of upcoming studies, through flexible and convenient payment methods – https://www.businessmarketinsights.com/buy/single/BMIRE00025175

The study conducts SWOT analysis to evaluate strengths and weaknesses of the key players in the Europe Dental CAD/CAM market. Further, the report conducts an intricate examination of drivers and restraints operating in the market. The report also evaluates the trends observed in the parent market, along with the macro-economic indicators, prevailing factors, and market appeal with regard to different segments. The report predicts the influence of different industry aspects on the Europe Dental CAD/CAM market segments and regions.

The research on the Europe Dental CAD/CAM market focuses on mining out valuable data on investment pockets, growth opportunities, and major market vendors to help clients understand their competitor’s methodologies. The research also segments the Europe Dental CAD/CAM market on the basis of end user, product type, application, and demography for the forecast period 2021–2028. Comprehensive analysis of critical aspects such as impacting factors and competitive landscape are showcased with the help of vital resources, such as charts, tables, and infographics.

This report strategically examines the micro-markets and sheds light on the impact of technology upgrades on the performance of the Europe Dental CAD/CAM market.

Business Market Insights is a market research platform that provides subscription service for industry and company reports. Our research team has extensive professional expertise in domains such as Electronics & Semiconductor; Aerospace & Defense; Automotive & Transportation; Energy & Power; Healthcare; Manufacturing & Construction; Food & Beverages; Chemicals & Materials; and Technology, Media, & Telecommunications.

If you have any questions about this report or would like further information, please contact us:

Julian Assange's father and brother said they were counting on European lawmakers to stop Britain from extraditing the WikiLeaks founder to the U.S.

Clear thinking isn’t exactly at plague levels, either.

Dozens of khaki-clad Ukrainian civilians performed military exercises in fortified positions left by Russian troops in Bucha.

Remains found buried in the Amazon were brought to Brasilia for official identification - Copyright AFP Loic VENANCEJoao Laet with Jordi Miro in BrasiliaBrazilian...

COPYRIGHT © 1998 - 2022 DIGITAL JOURNAL INC. Digital Journal is not responsible for the content of external sites. Read more about our external linking.